EVERPURE EV9100-94 SO-24 WATER SOFTENING SYSTEM

Description

For your consideration, here’s a NEW Everpure SO-24 Espresso Water Softening System, New in Box., never used. It includes an Everpure 20 inch Filter Cartridge Model SO204 (EV9105-45) and an Everpure SO24 Filter cartridge (EV3096-93). Also includes mounting bracket , pressure relief valve and the filter wrench. Note that these units were in storage and were removed from their original packaging to verify they were the correct and complete items.
We’ve checked around and the best online price we’ve found is 7 plus shipping so to give you the best price we can we’re pricing this at 0.00 including shipping if you use the Buy It Now option, otherwise shipping is to anywhere in the U.S..
The Everpure SO-24 System with Softening Cartridge is a water softening system for commercial espresso, specialty coffee, and iced tea machines. The EV9100-94 Everpure SO-24 Espresso System w/ Softening Cartridge reduces lime scale and mineral build-up that can shorten the lifespan of your coffee or espresso equipment. The SO-24 Espresso System with Softening Cartridge utilizes ion exchange in order to reduce minerals like calcium and magnesium and can be used on water with hardness levels up to 30 grains per gallon (500 mg/L).
The SO-24 Softening System is also effective with iron reduction and is useful where full size water conditioners are considered impractical. For the best possible results, use the EV9100-94 in combination with an Everpure water filtration system.
Everpure SO-24 System with Softening Cartridge specifications:
4,500 grain capacity
Inlet/Outlet size: 1"
Max. Temp: 35-100 F (2-38 C)
Dimensions: 24" H x 8" W x 7" D
Maximum Flow: 2.0 gpm (7.6 Lpm)
Part number EV910094 or EV9100-94
Working Pressure: 10-125 psi (0.7-8.6 bar), non-shock
Installation Tips
Choose a mounting location suitable to support the full weight of the system when operating
Use 1" water line
Install vertically with bowl hanging down
Allow 2-1/2" clearance below the cartridge for easy cartridge replacement
Flush cartridges by running water through for one minute at full flow
Make sure O-ring on bowl is sufficiently lubricated
Always screw on bowls by hand; Do not use a housing wrench
Operation Tips
Change cartridges on a regular 6 month preventative maintenance program
Change cartridges when hardness of treated water increases to more than 3 gpg
Service flow rate must not exceed 2.0 gpm
Always flush the cartridge at time of installation and cartridge change
To determine cartridge life, divide total capacity of cartridge (4,400 grains) by the hardness in grains per gallon (gpg) or milligrams per liter (ppm), respectively
Use the Buy It Now option and we’ll pay shipping and insurance anywhere in the U.S. We reserve the right to choose carrier based on shipping method selected at time of payment. Most packages will be shipped by either USPS, Fedex or UPS at our discretion. .